Coppercoat

HullWell is the exclusive distributor of Coppercoat in NZ.

• Coppercoat Multi-Season Antifoul Coating is proven internationally on over 80,000 vessels.

• Coppercoat is not a paint…it is a solvent-free, water miscible, two-part epoxy.

• Coppercoat is classified as non-eroding i.e., it does not leech biocides or any other harmful material into the marine environment.

• Coppercoat is solvent-free i.e., it does not emit harmful VOCs into the air.

• Coppercoat is manufactured using recycled, 99.70% pure, ultrafine copper powder.

• The two-part epoxy composition of Coppercoat provides hull substrate protection against water ingress and osmosis that is unavailable from antifouling paints or foul-release films.

• With a dry-finished thickness (DFT) of 200 microns, Coppercoat eliminates the requirement for primers, tie coats and undercoats that are typically required with other antifoul systems on new vessels. As a simple, single, continuous coating application, Coppercoat eliminates multiple inter-coat surfaces and the attendant risks of delamination.

• Coppercoat is harder than gelcoat with unmatched durability against impact and abrasive damage.

• Coppercoat is electrolytically inert and non-corrosive.

• The finished surface of Coppercoat has a coefficient of drag equal to or lower than the best hard racing ablative antifouling paints.

• The antifouling efficacy and protective attributes of Coppercoat are unaffected by high or low speeds or high or low frequency of use.

• Coppercoat can remain out of the water for long periods with no impact on antifouling efficacy.

• Coppercoat provides hull protection and antifouling prevention for up to ten or more years.

Request a Proposal